Engineering testing and support
Our extensive facilities offer small tests, model-scale tests, large-scale load tests and fire tests on structural elements. This test capability is complemented by expertise in the analysis of structures using all materials, including non-linear finite element analysis.
![Partition wall testing](https://lpcb.com/documents/311572/465646/Test-Di-Perforation-Main-1-scaled-1440x440.jpg/a3056bcc-0fa0-c067-3c37-201e3fe3ca64?t=1702025050314)
Partition wall testing
We verify the safety and performance of your partition walls through independent testing. Partitions are a crucial component of a building’s design and build. Modern partitions must be capable of withstanding various dynamic and static loadings.
Post-tensioning kits
We offer testing services for post-tensioning kits against ETAG 013. Post-tensioning kits are used in new construction, repair and strengthening of existing structures. They are generally found in concrete structures, but can be used with other structural material such as steel masonry and timber.
![Post-tensioning kits](https://lpcb.com/documents/311572/465646/ricardo-gomez-angel-XlweFAL9FdU-unsplash.jpg/1d15e09e-fc96-f24c-5fb3-cd55692f34ff?t=1716877697849)
Other engineering expertise
If you need engineering testing or support, we can also help with:
Steel construction
Concrete construction
Timber construction
Wind loading
Dynamic loading
Structural testing
Case studies
Testing a working platform
This project involved the testing of a working platform to be used during house construction in accordance with the requirements of BS EN 12811. Tests conducted included
Distributed loading
Hard and soft body impacts
Uplift
Assessment of structural design of MMC systems
We have assessed the structural design procedures of a number of modern methods of construction (MMC) systems as part of their application for BRE Global technical Approval.
Static load testing of a new composite floor system
This new flooring system using light steel components was tested to determine the degree of composite action between the steel and the concrete floor slab.
Testing of composite joints
This project involved testing of full sized steel/concrete composite joints to confirm their behaviour in fire following an explosion or an earthquake.
Testing the racking resistance of walls
We have recently tested the racking resistance of the walls of various off-site manufactured/MMC building systems. The data generated from the tests provides the system manufacturers with information they need in their semi-empirical approach to design against wind loading.
Structural testing
We carried out structural testing to confirm the performance of re-inforced concrete beams that have a recycled aggregate content.
Get in touch
For more information, call us on +443333218811, email us at enquiries@bregroup.com or use the online form.
Contact us